Carbide Putty
#10050 3 LBS.
Silicon carbide-filled epoxy putty for economical protection against wear and abrasion.
KEY FEATURES
Excellent abrasion resistance in aggressive industrial environments
Handles particulates less than 1/16
Withstands continuous service temperatures to 250ºF
Plastic Steel® Putty (A)
#10110 1 LB.
Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.
KEY FEATURES
Bonds to most metals, concrete and some plastics
Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted
Excellent resistance to oil, gasoline, water and many chemicals
Listed under NSN Stock #8030-00-903-6545; #8030-00-962-4430
Plastic Steel® 5 Minute® Putty (SF)
# 10240 1 LB.
Fast-curing, steel-filled epoxy for dependable emergency repairs in less than one hour.
KEY FEATURES
Hardens in one hour
Mixes, applies, and cures at temperatures as low as 40°F
Aluminum Putty (F)
# 10610 1 LB.
Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.
KEY FEATURES
Repairs air conditioning system components
Listed under NSN Stock #8030-00-051-4511; #8030-00-670-8553
Bonds to aluminum and many other metals
Fills porosity in aluminum castings
Can be machined drilled or tapped using conventional metalworking tools
Qualifies under Mil Spec MIL-PRF-24176C, Type II
Titanium Putty
# 10760 1 LB.
# 10770 2 LBS.
High-performance, non-rusting titanium-reinforced epoxy engineered for making repairs to machinery and equipment that can be precision machined. Withstands heavy loads in hard chemical environments.
KEY FEATURES
Excellent temperature resistance (350°F)
High compressive strength (18,800 psi)
Resistance to chemicals and most acids, bases, solvents, and alkalis
Qualifies under Mil Spec MIL-PRF-24176C, Type I
Listed under NSN stock #8030-01-335-0562
FasMetal™ Putty
# 10780 3/4 LB.
High-performance, alumina-filled epoxy for making fast, dependable emergency repairs to leaks in pipes carrying ores, coal, cement, sand, and gravel.
KEY FEATURES
Hardens in 5 minutes
Economical and convenient
Applies in temperatures as low as 40°F
Wear Resistant Putty (WR-2)
11410 1 LB.
11420 3 LBS.
Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds.
KEY FEATURES
Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics
Contains wear-resistant fillers for low friction applications
Also available in liquid form
Listed under NSN stock #8030-00-229-8735; #8030-00-229-8736
Wear Guard™ High Impact
#11460 30 LBS.
High density micro alumina ceramic beaded-filled epoxy system with a flexible additive for superior impact and abrasion resistance
KEY FEATURES
Non sagging putty in a creamy consistency
High compression and impact strength
Service temp to 300°F
Best adhesion to metal of any beaded product
Flexible epoxy system
Wear Guard™ Fine Load
#11470 30 LBS.
Micro-high-alumina, ceramic bead-filled, high-density epoxy system for equipment protection.
KEY FEATURES
Handles particulate smaller than 1/8”
Can be troweled to form a smooth surface
Excellent for dust particulate applications, slurry pumps, scrubbers, screens, and screw conveyors
Withstands operating temperatures as high as 300°F
Outstanding resistance to a wide range of chemicals
Wear Guard™ High Temp
#11480 30 LBS.
High-Temperature and high-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in processing equipment.
KEY FEATURES
Heat-cured, trowelable system that gives up to 30% improvement over conventional wear compounds
Withstands continuous service temperatures to 450°F
Unmatched resistances to many acids, bases, salts, and solvents
Excellent abrasion resistance to all sizes of materials and particulate in high heat applications such as exhausters, pulverizers, and cyclones
Wear Guard™ High Load
#11490 30 LBS.
High-alumina, ceramic bead-filled epoxy system for outstanding abrasion resistance to processing equipment
KEY FEATURES
Handles particulate greater than 1/8
Operational temperature resistance to 300ºF
Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals
Trowels onto overhead or vertical surfaces without sagging
Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes
Ceramic Repair Putty
# 11700 3 LBS.
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals, and acids.
KEY FEATURES
Temperature range up to 350°F
Excellent for filling voids and rebuilding metal castings
Qualifies under Mil Spec DOD-C-24176B(SH) Type I II
Brushable Ceramic Red
#11760 2 LBS.
Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.
KEY FEATURES
Temperature range up to 350°F
3 colors (red, blue, white) to insure uniform coating
White is NSF-certified for use in potable water applications
Low-friction surface reduces turbulence, wear, and cavitation
Red and white formulas are acceptable for use in meat and poultry plants
Outstanding chemical resistance to acids, solvents, and alkalis
Brushable Ceramic White
#11770 2 LBS.
Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.
KEY FEATURES
Temperature range up to 350°F
3 colors (red blue white) to insure uniform coating
White is NSF-certified for use in potable water applications
Low-friction surface reduces turbulence, wear, and cavitation
Red and white formulas are acceptable for use in meat and poultry plants
Outstanding chemical resistance to acids, solvents, and alkalis
Brushable Ceramic Blue
#11765 2 LBS.
Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.
KEY FEATURES
Temperature range up to 350°F
3 colors (red blue white) to insure uniform coating
White is NSF-certified for use in potable water applications
Low-friction surface reduces turbulence, wear, and cavitation
Red and white formulas are acceptable for use in meat and poultry plants
Outstanding chemical resistance to acids, solvents, and alkalis
Underwater Repair Putty (UW)
#11800 1 LB.
High-performance technology for repairing, patching, and rebuilding equipment in habitually wet environments, including under water.
KEY FEATURES
Penetrates wetness to bond securely to steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics
Invaluable for use in pulp and paper mills, wastewater treatment plants, and marine environments
Eliminates the need for substrate to be thoroughly dry before repair
Non-rusting; easy-to-mix and apply
Cures in temperatures as low as 40°F
Listed under NSN Stock# 8010-01-120-8753
Flexane® 94 Liquid
15250 1 LB.
15260 10 LBS.
Castable, non-shrinking, low-viscosity (6,000 cps) urethane compound that cures to a rigid rubber material (Hardness Shore A 97).
KEY FEATURES
Makes flexible molds and non-scratching holding fixtures
Makes cast rubber replacement parts that may have been discontinued
Requires only a five hour demolding time
Hardness rated at 97 Shore A
Listed under NSN stock #8030-01-036-9228
Flexane® High Performance Putty
#15330 1 LB.
High-performance, trowelable lining for maximum protection against wear due to abrasion, gouging and impact.
KEY FEATURES
Lines and protects processing equipment and repairs rubber parts in the most aggressive environments
Cures to a tough (tear strength 400 pli), resilient rubber compound (Hardness 78 Shore A)
Bonds to metal, rubber, wood, fiberglass, and concrete
Used with Flexane® Primers for maximum adhesion
Flexane® 80 Putty
#15820 1 LB.
Trowelable, 100% solids, tear-resistant urethane compound used to line and repair process equipment exposed to impact abrasion, vibration, expansion, and contraction.
KEY FEATURES
Cures to a tough, medium-hard rubber (Hardness 87 Shore A)
Easy-to-mix; smoothly trowels
Service temperatures to 180°F in dry environments and 120°F in wet environments
Bonds to metal, concrete, rubber, wood, and fiberglass surfaces
Used with Flexane® primers for maximum adhesion to metal, rubber, and concrete surfaces
Flexane® FL-10 Primer
# 15980 4 OZ.
Liquid primer used in conjunction with all Devcon® Flexanes in order to maximize the adhesion to metals and itself.
KEY FEATURES
Required for bonding all Devcon® Flexanes
Flexane® FL-20 Primer
#15985 4 OZ.
Liquid primer used in conjunction with all Devcon® Flexanes in order to maximize the adhesion to concrete, rubber, wood, fiberglass, and itself.
KEY FEATURES
Provides maximum adhesion to rubber, wood, fiberglass, concrete, and Flexane®
Required for bonding of all Devcon® Flexanes
Listed under NSN Stock #8010-01-343-4809
Cleaner Blend 300
#19510 1 PINT
Safe, multi-purpose degreaser for use on heavy grease and oil deposits on metal.
